Knife Review: Fiddleback Forge Bushfinger (Production Model)

Introduction:

The Fiddleback Forge Production Bushfinger with black micarta handle.

Okay, so first things first, this review is a year and a half overdue.  I have been very busy during grad school, and I have really let my knife reviewing slide.  Also, I liked this knife, but couldn't give it a glowing review, and that left me feeling conflicted and not wanting to face writing this review.  I'm going to try to get more active with this blog this summer, and this knife review is important to that effort.

----------------------------------------------------

The knife I am reviewing today is the Fiddleback Forge Production Bushfinger.  The Fiddleback Forge "Production" line is what are known as midtech knives.  Fiddleback Forge is a handmade knife company, but that means that a lot of their handmade forged knives can be hard to get a hold of, so they came out with the production models that are made using more production friendly methods and materials (but still high end) like particle steels and micarta for the handles.  Midtech is the middle ground between custom knives and regular production knives.  It is a pretty amorphous term for an ambiguous category that mostly implies that the knives are fancier and more limited than normal production knives, but not as fancy and expensive as full custom knives.  In the case of the Fiddleback Forge Bushfinger it means the production version is about $225 vs. $350-plus-if-you-can-even-manage-to-snag-one for the handmade forged versions (You can look here for some images of the handmade Bushfingers).  So the production versions are relatively affordable, easy-to-get versions of popular models.

This particular knife was a prize that I won.  I entered into a drawing for sharing pictures and stories of practicing bushcraft skills with children, and I got lucky and received this lovely Bushfinger.  My desire to say nice things about the Bushfinger for use during bushcraft was a big part of why I delayed writing this review, because even though I really like the knife, I don't like it for bushcraft.  This knife has made it into regular use, but actually in the kitchen, not in the field.

The TL;DR review summary: 

This is a great little general purpose knife, but not great for working with wood.  In my opinion, you are better off with a $15 Mora knife for bushcraft, but the Fiddleback is far superior for most actual camping tasks like food preparation.

Let's Start With the Specs:

From the Fiddleback Forge website:

Blade length - 4 inches
Handle length - 5 inches
Blade metal - 1/8" thick S35VN (or maybe 5/32", different sites say different things, and I don't have my calipers handy)
Handle material - Canvas Micarta (black canvas micarta on the reviewed knife)
Tang - Sekeletonized full
Grind - Flat
(Note: no Rockwell hardness is specified on the website

The blade on this knife was given a stonewashed finish, which is one of my favorite finish types.  A stonewash finish is created by... tumbling the knife with pebbles.  It is what it sounds like.  In my experience stonewash finishes feel pretty low friction, and they are more resistant to corrosion than bead blasted finishes.  Additionally the stonewash hides scratches pretty well, which helps keep the blade looking nice.  The stonewash on this particular knife has worn off somewhat unevenly.  It has seen quite a bit of use, but I have been a little surprised compared to other stonewashed knives I have owned and used.  But the wear is hard to capture in a photo.

Closeup of the wear on the finish after a year and a half of use...  that somehow doesn't really show what I am talking about.

The steel of the blade itself is the very fancy supersteel CPM S35VN.  This is a very tough, hard wearing, corrosion resistant, stainless steel that is able to take and hold a very keen edge.  It is a particle steel, which as I have written before is made with science magic.  The fantastic performance has something to do with carbides... I think.  I'm no metallurgist (I've actually learned a lot about metalurgy over the last couple years, but it is a fantastically complicated topic and I am no expert, so this blurb still holds true).

It is a handsome knife.

This is a handy sized, but not large fixed blade.  The Bushfinger avoids one of my pet peeves common to smaller fixed blade knives by having a full sized handle.  I have big hands, so little handles are a problem for me.

Generous handle, don't be fooled by my bearpaws.

Like I said, I have big hands, so unless you also have big hands the knife probably won't look quite so small in your hand.  The handle is a full five inches, so it has plenty of handle, and that handle is very comfortably designed.  The comfyness of the handle is one of the nicest features of the knife for me.

The blade size and shape is well designed for general use.  The swell of the base of the blade keeps your fingers from sliding up during use.  The point is nicely sharp, and the shape provides a long shallow belly that is handy for slicing things like meat and vegetables as well as cutting cordage and boxes.

A Note on the Sheath:

The RLO sheath is good looking and offers excellent retention without being to clingy.

The guy who gave me this knife had a custom sheath made for it, a leather covered kydex RLO sheath (RLO is Rick Lowe Custom Leather) with a Tek Lok belt clip.  It is a cool setup, but I think I would actually prefer the leather beltloop sheath with the ferro rod holder that comes standard from Fiddleback Forge.  I like my knives to sit lower, and I like to wear them on my belt.  The sheath is a part of why this particular knife hasn't made it onto many hikes for me.  But it would be great for attaching to webbing or a backpack.  It is a cool sheath, just not my style.

Knife next to sheath.

Review:

Steel:

CPM S35VN is an excellent steel.  It certainly meets the standard of being a supersteel.  It is a high quality particle steel, made in the USA.  It is well known, and has excellent characteristics for knife making.  And while $225 is not chump change, it is not a high price for a good quality US made knife with a supersteel blade.  I think that for the price this is an excellent steel.

Blade Finish:

Stonewash is probably my favorite blade finish.  It usually is excellent for a user knife.  It hides scratches, it looks nice, it is not too reflective, and it has a lower friction coefficient than most coatings.  But as previously mentioned, I have not been thrilled with the uneven way the finish has worn off.  Perhaps it is just a result of use, but I think it was caused by an uneven finish.

Blade:

This knife was not new when it came to me.  It was in excellent condition, but I can't evaluate the quality of the factory edge.  When the knife came to me it was duller than I like, so I sharpened it and gave the edge a slightly more acute terminal bevel.  The reprofiled edge handled wood work a little better, but still didn't make this a knife I really like for bushcraft.

The shape of this blade is good for general purpose, but for me it has not been good for working with wood.  I have tried carving and whittling with this knife, and really didn't find it a good option.  It is possible to make shavings for tinder with the knife, but it is not that easy.  If you are like me then you like to have obsessively pretty shavings and feathersticks.  Despite the name of the knife, I found it unpleasant to try to make feathersticks with.  For tinder making the knife was functional, and not much more (You can compare the wood shaving picture below to this one from the Ambush Alpha):

I just can't seem to get really good pretty shavings with this knife.

But even though I found the knife a disappointment for woodwork, it is a pleasure to use and hold, and a generally useful design.  I found it so nice that it ended up going into my kitchen knife block to use as a petty-knife.  It isn't often that I come across a knife that is robust enough for camping use and also refined enough for daily use in the kitchen.  The bladestock is thick for a kitchen knife, but not too much so, and the blade height and angling makes the knife easy to use on a counter or cutting board.

So all in all, I like the blade, just not for wood.

Handle:

Outstanding.  Very comfortable handle.  Great ergonomics.  Well done CNC sculpting of the micarta.  Good size.  Hand filling but not too big for people with normal sized hands.

Fit and Finish:

As I said, this knife came to me used, but in good condition.  As such, I cannot make claims as to initial edge quality.  Other than that, this is a lovely knife.  The uneven wear of the stonewash didn't become apparent until after a few months of use, and since I typically only use a knife for a month before I review it, that wouldn't have been an issue in a more timely review.

Otherwise, this knife was excellently made.  The sculpting of the micarta takes the grain of the material into account, which makes for lovely patterns in the handle.  The logo on the spine is attractive.  The knife is certainly a good looking knife, and well made.

Use Review:

As I have mentioned a couple times, I both really liked this knife, and was disappointed in it.  I liked it so much that it became a daily user, but in the kitchen, not the field.  It is a little short and robust for a petty knife, but it is just such a nice knife that it makes me want to use it.  It has served me well over the last year and a half getting almost daily use in the kitchen.

But I can't quite get over how much I didn't like the knife for bushcraft.  I have read other reviewers that seem to like the knife just fine for woodwork.  I have seen other people post pictures of fine feathersticks they made with a Bushfinger, but the knife just doesn't work quite right for me with wood.

It would be perfectly fine as a knife for camping and hiking.  It is a good size and weight.  Handy and generally useful design.  And the handle and blade design make it feel very secure in the hand without forcing your hand into any particular positions.  The design is stout enough to stand up to any uses that I would typically put a knife through (though if I were looking for a sharpened prybar to pound through logs I would probably get something else).

Summary:

 This is a good knife.  A pretty knife.  A useful and handy knife.  But despite the name, I would not recommend it for bushcraft.  But like I said earlier, there are great low cost options like Moras for bushcraft.  What really sets apart a knife like the Fiddleback is materials, style, and execution; and all three of those are excellent with all of the Fiddleback knives.  The handle really is great.  So this isn't an unequivocal review, but if this knife appeals to you I suspect you will like it.

This angle actually shows the wear on the finish better.

Fiddleback Forge Production Bushfinger

Knife Review: Ambush Alpha

Ambush Alpha

The Ambush Alpha with the wooden chrysanthemum I made to demonstrate suitability for cutting curls

Introduction:

This knife review represents an exciting first for me, this is the first time a knife was sent to me for testing and review.  I only had this one for a week, so the review is based on a fairly limited time frame, but I think I did a good job of covering the basic uses that this type of knife would be put through.

The Ambush Alpha is a general field knife, often referred to as a bushcraft knife.  It's designed for all-around camping and hunting use.  It features a beefy overbuilt type of design intended for hard use.  The blade is made of 3/16 thick stock, with a full (skeletonized) tang running through the handle.  It's a solid feeling knife.

The Ambush Alpha is a new knife from a new knife company, Ambush Knives.  As the knife was being launched there was quite a kerfluffle over the similarity between the Alpha and some of the knives produced by SURVIVE! Knives.  I don't have any experience with SURVIVE! Knives, so I can't make any direct comparisons myself, and I feel like the design of the knife is similar to a lot of other knives designed for the same purposes, but the SURVIVE! GSO-5.1 does look quite similar and is made of very similar materials (functionally identical) as the tester I was given to review.  That said, considering how similar many knives designed for "bushcraft" are, I would not presume to cast stones.

For the purposes of the review, it was asked that potential reviewers have experience with heavy duty survival style knives of comparable design, so that the performance of the Ambush Alpha could be compared to the performance of other knives.  In my case the knife that I tested the Alpha against was the Spartan Harsey Difensa.  The Difensa is obviously somewhat different, but both are made of 3/16 particle steels with high flat grinds, skeletonized full tangs, and micarta handles.  For the purposes of this review I think they are plenty close enough for comparison.

Difensa and Alpha side by side.  Sorry for the poor picture quality, I was having some camera trouble that day.

Let's Start With the Specs:

Specifications (From Knives Ship Free website):

Overall Length: 10.5"

Blade Length: 5.125"

Weight: 8.8 ounces

Cutting Edge: 5"

Blade Height: 1.25"

Blade Thickness: .187"

Blade Steel: CPM 3V

Blade Finish: Satin (The Blade Finish on the tester is actually stonewashed)

Heat Treat: Differentially heat treated

Hardness: Edge: 58-60HRC; Tang: 43-45HRC

The Alpha is a fairly substantial knife, though it comes in just a little over a half pound.  With the center of gravity sitting right at the front of the handle I found the knife to feel surprisingly neutral in the hand, and lighter than I expected.

The handle of the tester was made of contoured canvas micarta (though the Alpha is available with a number of handle options including G10, antler, and various woods).  Micarta, as I have discussed in other reviews, is a handle material I fully approve of.  I find that micarta, when given a rough finish as it was on this knife, feels almost soft in the hand.  It is a stable material, strong and resilient.  I also like that it gets a little bit grippier when wet, always a plus in a knife you might be using in inclement weather.

The blade on this knife was given a stonewashed finish, which is one of my favorite finish types.  A stonewash finish is created by... tumbling the knife with pebbles.  It is what it sounds like.  In my experience stonewash finishes feel pretty low friction, and they are more resistant to corrosion than bead blasted finishes.  Additionally the stonewash hides scratches pretty well, which helps keep the blade looking nice.  The stonewash finish also keeps the blade from being too reflective if that is a concern.

The steel for this knife is CPM 3V.  CPM 3V is a particle super steel, as I have said before, these steels are made with science magic.  I'm not going to try to explain all of the specifics because I am not a metallurgist and blade steel is a surprisingly complicated topic.  There is no one perfect steel for every knife.  Each steel type has its own set of properties, and the choice of which properties are important to a knife is a key decision for knife makers.  Additionally, the properties of various steels are affected by heat treatment (the ways that the metal is heated and cooled to control hardness) and heat treatment can even affect the crystalline structure of the steel and the ways that the compounds in the steel combine.  So for the purposes of my reviews, science magic.

That said, I think it is worthwhile to discuss the characteristics of CPM 3V a little.  CPM 3V is not a stainless steel, though it does contain 7.5% chromium, which provides more stain resistance than one might expect from a carbon steel.  In terms of edge holding properties at the hardness used for this knife, CPM 3V is very comparable to CPM S35VN (which is the stainless particle steel the Difensa is made of).  The biggest difference between 3V and S35VN (besides rust resistance) is toughness.  3V is roughly 3 times as impact resistant as S35VN.  It is a very tough steel, appropriate for a knife intended for rough applications.

To sum up on the steel:  CPM 3V is very, very tough, not stainless, and holds an edge well.

A note on the sheath:  

The tester came with a Kydex sheath, which is one of the sheath options offered at no additional price.  Kydex is a thermo-plastic, and the sheaths made out of kydex are generally form-fitting.  I don't have a lot of experience with Kydex sheaths, I am personally partial to more traditional looking sheaths, but Kydex does offer some functional advantages.  Kydex sheaths hold the knife in place by being fairly rigid and formed to fit the knife.  This means that the knife can be pulled out quickly without needing to unsnap anything, but the knife is still held firmly in place.  Plastic also is resistant to water and other environmental issues (unlike leather for example).  The sheath performed fine.

Review:

Steel:

I found the performance of the CPM 3V impressive.  I was actually the third person to get to use the tester.  The first person stropped the blade to give the knife a very fine edge.  The next reviewer did not sharpen the knife after his testing, and the knife came to me still holding a hair shaving edge.  After the testing I subjected the knife to, the knife still held the fine edge.  I didn't get too abusive with the knife, but I did try to use the knife a good amount in a variety of settings to get an idea of the performance.

My impressions of CPM 3V's performance as a blade steel were unambiguously positive based on my experience with this knife.  I tend to prefer stainless steels myself (particularly living in the Pacific Northwest, and I don't know how corrosion resistant 3V is long term), but other than still having a prejudice in favor of stainless, I am sold on CPM 3V as an excellent choice for a blade steel.

Blade Finish:

As I stated earlier, stonewash is one of my favorite finishes.  In the case of this knife in particular, one of the advantages of stonewash as opposed to a blade coating was demonstrated during head to head comparison.  Stonewash has a lower friction coefficient than a ZRN coated blade, especially when wet.  I'll discuss that more later in the review, but the finish is definitely a positive.

Blade:

I was not so thrilled with the blade shape overall.  The rapidly dropping point serves to keep the blade thick pretty much the whole way through to the point.  This makes sense as the knife is designed to be a hard use bush knife, not a slicer or combat knife, but it just felt kind of...  frumpy to me.  Frumpy is the best word I can think of.  The blade didn't feel agile or graceful, it just felt like a sharp, somewhat pointy bar of metal to me.  

I don't have experience with other blades with this sort of "bushcraft" blade style, so I can't say whether or not this knife blade was somehow less exciting than other knives shaped similarly, but I suspect that a lot of what left me cold about the blade would hold true for many bushcraft blades.

The blade is not a negative, it just wasn't a positive for me either.  It was neutral.

Handle:

The handle actually surprised me.  My first impression when I opened the box was that the handle looked boring.  My next impression when I picked it up was that the handle felt square and boxy.  My third impression was that the handle did not crowd my pinky, which I figured was at least one positive.  I had low expectations for the handle at that point.

What surprised me was that when I actually used the knife it turned out to be very comfortable in actual use, especially during longer use.  The handle, which I initially found less than welcoming, turned out to be very hotspot free.  The only problems I had with the handle were actually more about the blade, the blade lacks a finger choil and jimping, which I felt limited the grips that were available to me.  As long as I stuck to the handle I was fine, but for some of the whittling, trying to choke up on the blade was awkward.

So the handle was definitely a positive.  The handle didn't wow me out of the box, but in use it became one of my favorite things about the knife.

Fit and Finish:

Pretty good.  No real complaints.  At risk of sounding repetitive, the fit and finish was not as flawless as the Fantoni, but nothing has wowed me quite like that knife.  For the price range (mid-$200's USD), the fit and finish seemed perfectly adequate.  If all of Ambush's knives come out that nicely finished, they will be doing well.

Use Review:

Kitchen:

Food prep is, in my opinion, one of the most important jobs of a general purpose camp knife.  The ease with which one is able to handle all of the various jobs of making food in the bush is going to have a real impact on how likely I am to pack a knife out into the back country.  For example, I was shocked at how well my Kershaw Cryo G10 handled kitchen tasks, which made it a pretty indispensable knife for me.  Sadly, thus far my experiences with heavy duty knives has convinced me that I really am not crazy about them for cooking.

Unfortunately, my food prep pictures didn't turn out very well, so there isn't a lot to show.  But when I was cooking with the Alpha, I made sure to do the exact same work with Difensa.  Through all of the vegetables both knives performed roughly equally.  The shape of the Difensa seemed a ever so slightly more kitchen friendly, but the smaller guard on the Alpha more than made up for any blade shape deficiencies.  Both knives made cutting carrots an annoyance.

However, when I moved on to meat the Alpha really got a chance to shine.  As I said earlier, the stonewashed blade has lower friction than the ZRN coated Difensa.  For most vegetables this didn't make much of a difference, but in meat the relative ease with which the Alpha sliced was very apparent.  Additionally, the blade shape that I called frumpy, is excellent for dealing with things like bony joints.  The shape of the blade is great for jointing.

The kitchen testing portion convinced me that the Alpha might not be the best kitchen knife, but I think it would make an excellent hunting knife.  I was not able to do extensive animal testing, but cutting up meat at home convinced me that the Alpha would be an excellent choice for skinning, cleaning, and jointing a carcass.

So for food prep, both the Alpha and the Difensa were less than stellar for vegetables, but the Alpha really performed well with the meat.

Chopping:

For chopping the Alpha was fine for a five inch hunting knife, but nothing special.  This was one point of comparison where the Difensa really was clearly better.  Honestly, comparing the two on this point seemed unfair to the Alpha.  The Difensa has turned out to be a pretty remarkably capable chopper for a six inch bladed knife.  I could go on, but this review is not about the Difensa.  

I think a big part of the subjective difference in chopping boils down to underlying differences in design.  The Difensa is essentially a fighting knife that can do other things, whereas the Alpha is designed for more general tasks.  The Difensa puts the center of gravity just a little lower in the handle, right in the middle of where the index finger sits, this makes the blade feel very lively in the hand, and the handle geometry really facilitates a powerful stroke (kind of like a hatchet).  In comparison the Alpha feels very neutral in the hand.

The Difensa says "Hell yeah!  Let's chop stuff!"  The Alpha says "Sure, I can do that too, if you want."

Batoning:

For the life of me I do not understand the fascination with batoning.  But reading reviews of bushcrafting knives, and just reading about knives in general lately makes it very clear that batoning is totally in.  If I am going to do a review of a bushcrafting knife, I'm going to have to baton with the knife.  And if I am going to compare knives, that means I will also have to beat on my knife.

For those of you who may not know, batoning is using a knife to split wood by beating on the spine of the knife with another stick.  As you might guess it takes a sturdy knife to stand up to this type of abuse.  The Alpha is actually designed to handle batoning, so for the Alpha it is a standard use.

The Alpha batoning through a piece of ash.  It performs like it was designed to baton, which it was.

The Alpha capably made little pieces of kindling out of the ash.

The Difensa made kindling just as well.

Both of these knives handled batoning very well.  They are made from metal of the same thickness, and both have high flat grinds, and both are sharp pieces of metal that can be beaten through a firelog.

Alternatively, one could take the approach I prefer and just use a hatchet to make kindling.  But if you could only carry one edged metal tool, both knives would handle batoning just fine.  

And I have to admit, it's kind of fun to baton, even if I think it's silly.

Curls:

The other thing that one must do and take pictures of while reviewing a bushcrafting knife is make wood curls.  This is actually totally legit in my opinion.  Making wood shavings for starting a fire is very important if one is to engage in primitive fire starting.  Being able to make well controlled small cuts is also important for whittling.

This is also an area where the Alpha does very well for a full size knife.

I made some quick curls in a piece of ash, but I wanted to have a little more fun with this.

So when I got home I picked up a piece of applewood

I trimmed off the bark and made a wooden Chrysanthemum for my mum, for mother's day

Then I decided to see how the Alpha handled push cutting though wood

Quite well actually

Just a fun bit of silliness

But the convexed terminal bevel really makes it not that hard to push-cut right through a branch.

My cat wanted to know what a wooden flower smelled like

One of the neat things about the Alpha is that the flat grind gives way to a convex terminal bevel.  This really helps minimize shouldering, which is pretty neat considering how wide the blade stock is.  This makes cutting across the grain of a piece of hardwood much easier than one might expect.  This is also probably a big part of why the knife handles meat so well.  It's a neat design touch that I approve of.

Summary:

The Ambush Alpha is a solidly constructed, well made knife.  Where the Alpha really shone most for me was in dealing with meat, even more than the wood working aspects of this knife, my experiences with the knife made me think that it would be an excellent option if one is hunting larger game like elk or moose (though I have to reiterate that I didn't have the opportunity to actually field dress any animals with the knife).  The outstanding strength and super solid point of the knife, combined with ample belly and a good length of straight edge feel like a knife that could be used to skin and clean a large animal, and also could be used to get in an pry apart areas of connective tissue.  The excellent edge holding could really come in handy on some of the more edge wearing aspects of hunting.

I feel like for most specific tasks there are other knives and knife designs that would handle specific jobs better, but I appreciated just how much the knife seemed to be up for anything I threw at it, which I think is the essence of a good bushcraft knife.  And that is what this knife is meant to be, a knife that you can take out into the woods and have it do everything you need it to.  You need to cook dinner, it can do that.  You need to chop off some small branches, it can do that.  You need to make curls and shred for a fire, it can do that.  You need to pry stuff, it can do that.  You need to beat the knife through a log, it can do that.  The Alpha seemed to be up for most anything I cared to throw at it.